GB3GU

Keeper: Keith, GU6EFB
Channel: RB13
TX: 433.3250MHz   RX: 434.9250MHz
Type: Analogue Voice
CTCSS: 71.9
GUERNSEY [IN89RK]

UPDATEAllStar Connectivity Now Available

GB3GU has been upgraded to support AllStar connectivity alongside its normal voice repeater operation. This means you can now connect to nodes on the worldwide AllStar network directly through GB3GU, and enjoy QSOs with amateur radio operators around the world — just as if they were on your local repeater.

How to Connect

• Your radio must be capable of generating DTMF tones.
• To connect to a node, enter *3 followed by the node number.
  Example: *3 41223 connects to the Worldwide HubNet.
• To disconnect, enter *1 followed by the node number.
  Example: *1 41223 disconnects from HubNet.

For a full list of available nodes, please visit the AllStarLink Active Nodes List.

A big thank you to Mark, GU1LRO for supplying the equipment and helping to get everything interfaced and running.

GB7GY

Keeper: Jason, GU7DAI
Channel: DVU55
TX: 439.6875MHz   RX: 430.6875MHz
Type: DMR (Brandmeister)
Colour Code: 5
ST. PETER PORT [IN89RL]

TimeSlot 1: Talk Group 23515 (Guernsey) and local traffic
TimeSlot 2: Talk Group 91 (world-wide talkgroup)

Users can 'key up' any talk group of their choice on TS1 which will stay active for as long as it is used or 10 minutes of idle time before returning to TG 23515.

Note: To talk 'out' to a Talkgroup you must be keying up on that talk group each time you talk.

Use 4000 to disconnect and 234997 for 'Parrot' - audio testing service.

We recommend that you keep your Digital Contacts up to date, this will allow your handset to display call information rather than just DMR id numbers! There are multiple providers around for such lists, we have made good use of this one:

Anytone Digital contact list (regularly updated)

If you have just purchased a new DMR radio, you will need a DMR id. This can be obtained from the RadioID.net website:

www.RadioID.net

A word from the repeater keeper (GB7GY):

The DMR repeater represents a significant personal investment which I am happy to provide for the use of all radio amateurs for their enjoyment as well as my own.

I would welcome and be grateful for any support towards the ongoing support of this facility which I intend to continue to provide and maintain long into the future to the best of my abilities.

To donate any amount please use the QR code alongside.

Thanks for your support.

Jason GU7DAI